Moving Object Detection,Lane Departure Warning System,Car Parking Assistance,DVR Function, Customized accepted  INTRODUCTION:  The 360 Degree Around View Monitor System(360 AVM System) can help driver to view the situation around the vehicle in 360 degree, to avoid collision happen. 360 AVM System is consisted of one Electronic Control Unit(ECU) and four cameras. The ECU will process the images which captured by the four cameras and then output to the car display screen. Driver always meet these problems: when driving through a narrow path, it is hard to estimate the safe range for passing through; when parking, the visual scope form the vehicle mirrors are very limited, even the car with build-in rear view camera, there is still blind spot with the rear view image; when reversing, some small and low obstacles are hard to be seen through rear view mirror, or detected by car radar... The360 DegreeAround View Monitor System(360 AVM System)will help to solve these problems. Through the 360 AVM system, driver can view the situation around the vehicle in 360 degree, to avoid collision happens. 360 Degree Around View Monitor System(360 AVM System) is consisted of one Electronic Control Unit(ECU) and four cameras. The ECU will process the images which captured by the four cameras and then output to the car display screen. BASIC FUNCTIONS: 1) 2D Around View Display The original image which captured by the 4 cameras (front view/rear view/left view/right view) are fisheye images, the System will splice the images which captured by 4 cameras into a 2D vertical view seamlessly and smoothly, so the driver could see the environment around the car easily. Display range: front/rear≥3m, left/right≥2m 2) Different Direction Image Display The system can display images from different direction. It calibrates the original fisheye image from each camera to smooth wide angle image, so the driver can check the situations around the vehicle in different direction. 3) 3D Around View Display Display the 3D around view of front, rear, left and right. View shifts according to gear shifts, speed change, driver's operation, turn signals etc. View can be rotated in 360°around the car. The car model in the video will change direction according to the actual drive. Remark: The 3D car model is optional, it needs the practical car data to build the model. 4) View Shifts The system will shift different view according to turn signals, gear shifts or the AVM button on center control of the car. e.g., If right-turn signal on, the view will shift to 2D around view and 3D rear-right view. e.g., If gear shifts to "R", the view will shift to 2D around view and rear view. 5) Static Assisted Line or Dynamic Assisted Line for Parking When driver shifts the gear to "R", the system will display 2D around view and rear view. In the mean time, the static assisted line or dynamic assisted line will show up to assist driver for parking or reversing. Remark: The assisted lines ar...